GENTECH 16 KVA PETROL GENERATOR (ELECTRIC START - 415V ENGINE POWERED)

Electric start.

The 16 kVA 3-phase portable generator by Gentech. Fully assembled in Australia, this formidable machine is powered by a Honda V Twin GX690 petrol engine with electric start. The 27-litre fuel tank delivers over 6.6 hours of operation at 80% load that's enough for a days work (including coffee breaks!).

Welders, compressors and heavy duty equipment are no match for this generator. Its built tough, so you can rely on this workhorse around the construction site or farm for many, many years to come.

Please note that the single phase (230-240V) outlet produces one third of the generator's power capacity.

The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 3 year warranty.

Builders and farmers find this generator ideal for general all-round performance with lots of grunt for welders, compressors and other heavy duty equipment (e.g. wool presses, medium sized and medium sized air conditioners). Featuring a 34 litre fuel tank built into the base and an electric starting system, this generator is a winner at home, on the Ute or in the shed.

Specifications:

Power Rating: 16 kVA
Model Rating 0.8pf @ 50Hz: 16 kVA
Alternator Rating: 16 kVA
Engine Model: Honda V Twin GX690
Phase: 1-Phase / 3-Phase
Starting System: Electric start
Fuel Tank Capacity: 34 L
Noise Level @ 7m: 75 dBA
Outlets: 1 x 32 Amp 3PH 5PIN, 2 x 15Amp 1PH
Volts: 230V / 415V
Approx. Fuel Consumption @ 80% Load: 5.58 L/hr
Operation Hours @ 80% Load: 6.09 hrs
Fuel Type: Petrol
Diam.: 876 x546 x 700 mm (L x W x H)
Weight: 165 kg

Optional Extras:

80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.

80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.

80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.

10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.

WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.

10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.

10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets

10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.

10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.

R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.

80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.

Solar Panel Kit - To suit electric start generators to keep your batteries charged.

10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.


Generator Dust Covers:

COVER-SML - Cover to suit generators up to 3.6kVA

COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.


Battery Chargers:

RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)

PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.




All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.