ELDON MCSS18065-316
Finance Estimate
From $24.08*
per week
From 11.41% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 11.41% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 11.41% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Features
Title | ELDON MCSS18065-316 |
Type | Electrical Equipment |
Sub Type | Enclosures |
Class | Stainless Steel |
Make | ELDON |
Model | MCSS18065-316 |
Sale Price | $4,400 |
Listing Type | New |
Stock Number | S741 |
RefCode | TA929790 |
Description
We have a surplus stock of excellent quality enclosures which are new and unused.
The stainless steel single door combinable floor standing enclosure range, MCSS, with a IP 56 protection degree, is available in many different sizes. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure. This enclosure range is well suited for almost any environment, grade dependent.
Material:AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.
Frame:Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660.
Door:Mounted with four hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern.
Rear panel:Fitted by M6 torx screws. Standard facilities for rear door mounting.
Side panels:Supplied as an accessory.
Roof panel:Removable.
Lock:Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.
Bottom plates:One piece bottom plate with injected polyurethane gasket to ensure maximum sealing.
Mounting plate:Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is delivered attached on the outside of the enclosure packaging.
Earthing:All panels are earthed through their fittings and are equipped with a separate earthing stud.
Finish:240s pre-grained stainless steel (0,5 microns average).
Protection:Corresponds with IP 56 | TYPE 4X, 12, 13 | IK 10.
Approvals:CE, EAC, DNV-GL, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed.
Mounting requirement:Standard delivery ready for combined installation. For stand-alone installation add side panels.
Delivery:Frame with fitted door, rear panel, roof panel, bottom plate, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.
The stainless steel single door combinable floor standing enclosure range, MCSS, with a IP 56 protection degree, is available in many different sizes. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure. This enclosure range is well suited for almost any environment, grade dependent.
Material:AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.
Frame:Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660.
Door:Mounted with four hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern.
Rear panel:Fitted by M6 torx screws. Standard facilities for rear door mounting.
Side panels:Supplied as an accessory.
Roof panel:Removable.
Lock:Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.
Bottom plates:One piece bottom plate with injected polyurethane gasket to ensure maximum sealing.
Mounting plate:Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is delivered attached on the outside of the enclosure packaging.
Earthing:All panels are earthed through their fittings and are equipped with a separate earthing stud.
Finish:240s pre-grained stainless steel (0,5 microns average).
Protection:Corresponds with IP 56 | TYPE 4X, 12, 13 | IK 10.
Approvals:CE, EAC, DNV-GL, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed.
Mounting requirement:Standard delivery ready for combined installation. For stand-alone installation add side panels.
Delivery:Frame with fitted door, rear panel, roof panel, bottom plate, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.